A hard freeze can damage your equipment fast, costing you time and money. Designed for pump houses, backflow enclosures, and other critical areas, this industrial heater protects those spaces from winter temps using a precise automatic thermostat.
Frozen valves, cracked pumps, and stalled compressors can shut down a system and cost you a fortune. This heater was built to prevent that. With 1,000 watts of output, it has the strength to keep large enclosures and pump houses above freezing, while the forced-air design pushes heat into the corners where cold likes to linger.
Your work doesn't stop for cold snaps, and you don't have time to stand around monitoring gauges. That's why the thermostat is set to switch on at 50ºF and shut down at 65ºF. It holds equipment at a safe range that stops freeze damage without wasting energy trying to make compartments warmer than they need to be. And if conditions push the heater harder than expected, the heating element self-regulates to prevent overheating and ensures the unit continues running safely.
The setup is straightforward and designed to get protection running in minutes. The heater comes with a 6' marine-rated cord and a standard 110V plug, so there's no need to hardwire into your system. Once you've placed it in a spot that gives you the best airflow, it'll be good to go. Plus, for installs that need to be permanent, the bolt-on bracket (sold separately) secures the heater in place and resists corrosion year after year.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a real quick look at this Xtreme Heater's extra large industrial heater. Now, this 1000 watt Xtreme heater is going to protect your large RV and trailers from freeze damage by maintaining safe temperatures for industrial enclosures and compartments. This heater is gonna be great for enclosures, protecting valves, electronics, compressors, and fluid systems. So this is gonna be ideal for trucks, trailers, well and pump houses, pest control vehicles, and under skirted RVs. This heater is going to employ true force air technology pushing warmth evenly through confined spaces for consistent temperature control.
The automatic thermostat is going to kick in at 50 degrees Fahrenheit and then it's gonna power down at 65 degrees Fahrenheit, keeping your gear safely above the freezing line without wasting energy. The self-regulating design means that it can't overheat, so it's gonna offer a fail safe shield for equipment and well houses, pest control rigs, or pressure washing trailers parked under a winter sky. Installation's gonna be pretty easy. Hardware is included with this, and it does also have a pre-wired, six foot long wet rated cord and a standard 110 volt plug. And so this is gonna be built to withstand damp punishing environments.
It's relatively compact, yet, it's very strong. The anodized shell inside and out is going to resist corrosion, so you should have years of service in outdoor electrical panels or laboratory corners where precision does matter. So whether you're safeguarding an air compressor from cold induced hiccups, or ensuring that water flows freely in a pumphouse, this unit's gonna give you heat fast and it's gonna shut off early optimizing its efficiency. Let me get my ruler here, go over some measurements with you. So looking at the overall length, pretty close to eight inches long.
If you want to add the mounting feet there, a little over nine inches. The overall height about five and one eighth inches tall, and then the width or the depth right about three and a half inches wide. Now this does not include a mounting bracket. You're going to simply get the heater with some screws, but if you're looking for this same heater with a mounting bracket, the good news is we do carry that. It's gonna be the exact same heater except with the mounting bracket.
So if that's something that would work better for you, you can just take that model number that you see there on your screen, pop it in the search field of our website, that will take you to that heater with the mounting bracket, and you can add that to your order instead. Well, if you happen to have any other additional questions, don't hesitate to reach back out to us. We do have other heaters from Xtreme heaters, different wattages, different mounting options, so if this isn't exactly what you're looking for, give us a call. I'm confident we'll be able to find exactly what you need. But I think that's gonna wrap everything up. Again, my name is Andy. Thank you for joining me.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.